Polyether (PTMEG) type, TDI terminated
Polyether (PPG) type, TDI terminated
Polyether (PTMEG - PPG) type, TDI terminated
Caprolactone type, TDI terminated
Polyester type, TDI terminated
PU Cure MOCA
PU-Ancillary
PU-HA series are ultra high performance prepolymers for cast elastomers based on PTMEG with perfect compression set valves and good abrasion resistance.
PU-HD series are ultra high performance prepolymers for cast elastomers based on PTMEG with high hardness.
PU-TCA series are ultra high performance prepolymers for cast elastomers based on Caprolactone with high cut, tear resistance, ultimate water resistance and compression set.
PU-PGA series are low cost grades for cast elastomer based on PPG with soft segment.
PU-PGD series are low cost grades for cast elastomer based on PPG with high hardness.
PU Cure MOCA is a Methylene-bis-ortho-chloroaniline (MOCA) which used as a curing agent for urethane and epoxy resins.
PU-Release used for applying onto mould surfaces before the polyurethane is applied. This helps the cured polyurethane part release from the mould.
PU-Pigment used for color the elastomers.
PU-Anti foaming is the additive that reduces and hinders the formation of foam in industrial process liquids.
PU-Bonding agent is the primer applied with care to a substrate which can ensure adhesion when the liquid polyurethane is applied.
PU-MA series are medium performance grades for cast elastomers based on PPG and PTMEG in the soft segment.
PU-MD series are medium performance grades for cast elastomers based on PPG and PTMEG with high hardness.
PU-TSA series are high performance polyester prepolymer grades for cast elastomers with higher cut and tear, solvent and grease resistance.
PU-TSLA series are high performance and improved lower viscosities polyester prepolymer grades for cast elastomers with higher cut and tear, solvent and grease resistance.